Hi Nitin,
It is just me or everyone?
I cannot see the screenshots for OIF inport setting and OBN in OWL.
Anyway, here are some tips.
1. Create Inport in OIF
a). check OBN inport
b). select your BO and write anything (e.g to_View_All) in Select Operation
User ViewAll port type
c). Add a parameter and bind with a data field (create a data field in data model first)
d). Create an Event handler with BOOperation Read
In Type, select NodeID and bind with the data field from inport.
e). select the inport, in OnFile property, select the Event handler created in "d".
(if you created your screens with Navigation scenario, you would already have an OIF with already configured OBN inport).
2. Create OBN in OWL (use Add OBN using Wizard)
a) Select the BO you want to navigate and click Next
b) You will find the Operation you created in the Inport of OIF. Select that Operation
c) in the ourport configuration, add parameter and bind with NodeID from data model
d) change the event handler to something noticable
e) select the column you want to navigate (SAP_UUID), in the Click property , select the event handler.
Note : don't forget to add the OIF to the AssignedObjects of the WCView if it is not already there.
(recommend : create screens with Navigation scenarios and learn from the preconfigured screens first and then create your owns.)
Best Regards
Fred
